Building my First Balun

Sometime ago I bought some simple balun kits from Ebay. These are very inexpensive (~$10) and are designed to run no more than about 200W. They are from China so the instructions are sparse. I am wiring this as a 1:1 current balun to use in a quarter wave 20m vertical I am going to build to test against the end feds.I have the radial plate ready for this and just need to cut the radiator wire to length.I’ll only need 16 ft or so of mast to support it. Here is a view of the balun being built:



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: