Tag Archives: mt63

Getting ARES Ready…Hurricane Season Approaches

Hurricane season officially begins on June 1st. Our local club is gearing up some activities to support ARES operations in the event of a storm. We will be setting up a 2m digital simplex net on Thursdays at 7pm local time on 146.580 simplex using MT63 2000. Net control will be Cliff, N5CEY.

I will be net control for an HF voice and HF digital net on Saturday afternoons. Times and digital modes are yet to be determined. NVIS operations on HF will be desirable for these nets. I suspect that my current antenna (the DXtreme 53′ end fed) works fairly well as NVIS as it is up horizontal no more than 20 feet up. This net will give me a chance to test the 40m magnetic loop as NVIS. I am also thinking of modifying the homebrew buddipole to work NVIS as well. There is a PDF file that shows a simple way to modify a Buddipole to work NVIS portable. Yet another option is to build an easily deployable NVIS antenna for 40m and 80m per these instructions (thanks DX Engineering).

I am looking into a few choices for HF digital modes. MT63 1000, PSK31, Olivia and NBEMS. I am thinking of eventually asking net participants to limit power to 20W max to simulate off grid operations.

Last but not least, getting more local hams to test their HF rigs on Winlink using WINMOR. I cranked up the IC-7100 this afternoon and easily sent some emails on 40m to a node in Houston on 20W. Here is a good tutorial on setting this up.

Worked the local VHF Digital Net

W8WKE runs a Wednesday night digital net at 6pm on our local repeater system. I had been wanting to try it for sometime but did not have an interface for my VHF rig. Clifford, N5CEY, hooked me up with one of his Easy Digi USB interfaces for my Yaesu FT-2900R rig. I set up Fldigi on my radio laptop and set it all up to the rig. The net uses MT63-2000L protocol. When the net started I was able to start decoding the transmission without any issues. Unfortunately, I could not transmit. The Interface handles the PTT with the rig and appears to the PC as a serial COM port. I had both DTR and RTS enabled but nothing worked. Then I noticed a small enable check box above the COM setting. I enabled it and the transmit started working without a hitch. I have played with HF modes on DM780 so I need to now learn Fldigi. When I get back from my next business trip I plan to hook up the VHF antenna to the IC-7100 and try and work it from there with HRD. Working this net was a lot of fun and I am looking forward to trying it again.