VHF Winlink

I started looking into how to use VHF Winlink with the Icom 7100 and it’s built in sound card. I am close to getting this working. The Mail server nodes are all in the Harlingen Tx area about 30-40 miles from my QTH. The closest working digipeter is in La Feria, TX. Sadly, there does not appear to be a working digipeter in Brownsville. In order to get everything working you will need the following:

  1. CAT7200 software – This creates a virtual serial port that maps to the IC-7100 USB CV-I interface. Pretty handy software and should work for other older programs as well. Good overview of the setup can be found on WB4SON’s blog.
  2. UZ7HO SoundModem – This is a software TNC that connects to the virtual port created above and to the RMS Express software via TCP connection. W2YG has some good material on setup for Signalink hardware.
  3. RMS Express – I have used this before for HF email using WINMOR. For VHF at 1200 baud you will need to use packet winlink.

For setup info recommend seeing the video by K4REF showing an overview of the usage. I cannot report 100% success at this time. I am able to connect to the mail server and start handshaking with it. Unfortunately, no mail has been exchanged. I suspect that packets are being lost in the exchange resulting in retries and eventually it gives up. I’ll be playing with this some more and see if I can get a message through. Hard part is done with the rig and software setups.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: