Disassembly of the Mini60 Antenna Analyzer

Opening up the Mini60 Antenna analyzer is fairly straightforward. Fours screws on the side remove the back cover. This will expose the battery which can be removed easily by disconnecting the molex connector.

Photo May 14, 2 13 21 PM

The circuit board needs to be removed completely which requires the power switch and coax connector to be desoldered from the board. Desoldering tools and braid are highly recommended. Remove the four corner machine screws and the board should come out. Flip the board over and you will see the silk screened area where the bluetooth module is soldered.

Photo May 14, 2 41 11 PM

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: