Homemade Feed Panel

Here’s a picture of the homemade feed panel I made. I used a 1×4 cut to the length of my window. I cut out a small opening using a jigsaw and then sprayed the face with a moisture sealer. The opening is covered with a piece of Lexan. I drilled three holes in the Lexan for the cable connectors. There are two connectors for antennas and one for ground with space for at least two more connectors. I used silicone caulk around the edges of the Lexas to seal it. The edge of the panel was wrapped in weatherstripping and mounted on the windows sill. Works prefectly!



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: